Esita küsimus
1000 lõbu vasakule

AR 95e Super


From model AR 95e Super onwards we are using the engine TCD 4.1 L4 with turbocharging, charge air cooling and cooled external exhaust gas recirculation. The engines have a modular exhaust aftertreatment system (EAT). The powerful DEUTZ Common Rail (DCR®) injection system and the electronic engine control (EMR 4) with intelligent link to the drive management ensure optimum engine performance at low fuel consumption. The engines meet the requirements of the EU Stage IIIB and US EPA Tier 4 interim with DVERT®particle filter (DPF). The regeneration of the particulate filter by heat-mode during operation has no affect to the engine performance. A necessary active non-operating regeneration can only be initiated by the driver.

Technical data:

Engine / Drive
Deutz - Diesel engine TCD 4.1 L4
95 kW (129 HP) at 2200 rpm
Output-regulated hydrostatic drive with pressure cut off and closed circuit acting on all 4 wheels
1st and 2nd hydraulic gear and backwards / forwards movement can be engaged under load

Axles / Steering
Fully hydraulic steering angle of 40° to each side, ±12° angular movement at rear of vehicle
Fully hydraulic center pivot steering
Rigid axles with planetary reduction gears in wheel hubs
100%-differential lock in front axle
Emergency steering function

Tires: 15.5 - 25 EM

Operating data / Kinematics
Z-kinematics with a high tear out force
Track width: 1770 mm
Loader width: 2180 mm
Torque: 6900 daN
Lifting capacity at ground level: 8200 daN

Pallet fork attachment
Data for distance to center of gravity of 500 mm:
Tipping load, articulated: 6800 daN
Lifting force: 6800 daN
Payload 80% even surface: 3804 kg
Payload 60% even surface: 2853 kg

Areas of application
Civil engineering and road construction
Material handling

Tear out force
7200 daN

Download brochure


  • Töökaal: 8200 kg
  • Engine power: 95 kW/129 HP
  • Labida maht: 1,4 - 1,6 m³


Atlas Tehnika OÜ põhitegevus on ATLAS Maschinen GmbH ehitus- ja materjalikäsitlusmasinate müük, hooldus ja remont ning kasutatud masinate rent. Lisaks veel ATLAS ehitusmasinate ja ATLAS kraanade varuosade müük ning ATLAS, KINSHOFER, TEREX,SMP Parts, LEHNHOFF lisavarustuse müük. Müüme ja paigaldame firma Dunaset magnetigeneraatoreid ja magneteid.


Atlas Tehnika OÜ

Põrguvälja tee 29, Lehmja küla 75306, Rae vald, Harjumaa

Tel.: +372 6 006 952

Gsm.: +372 50 24429


Go to top